Pages - Menu

▼

Pages

▼

Jan 6, 2011

PCB for ATMEGA Inverter

Hi everyone,

Here I give the PCB for my design:

Top and bottom:



Bottom Copper:



Top Silk:



The PCBs were then modified by a professional. I hope to upload those soon as well. These are the ones I designed myself. As I am not a professional at PCB designing, the boards became slightly large.

Tahmid.
at

16 comments:

  1. AnonymousMay 26, 2012 at 4:02 AM

    Please give us the schematic and code.
    Regargs.

    ReplyDelete
  2. tanyaDecember 1, 2012 at 3:19 AM

    where is the schematic MR tahmid and the code

    ReplyDelete
  3. AnonymousOctober 24, 2014 at 1:42 AM

    Pls help with schematic with code here is my email: abduldesigner007@gmail.com

    ReplyDelete
  4. UnknownDecember 10, 2014 at 8:55 PM

    Hello, kindly share the controller hex file or C code.

    ReplyDelete
  5. ravi kumar yadawJanuary 20, 2015 at 11:09 PM

    hello Mr. Tahmid , I am ravi kumar yadaw from chennai(India). Do you have any idea about 18 scr based 3 phase to 3 phase cycloconverter. if yes then please send pulse pattern for gate control and how to change frequency as well as firing angle... please reply fast .. i am using FPGA (SPARTAN6) as a controller. i am waiting for your positive response.

    ReplyDelete
  6. AnonymousMay 14, 2015 at 2:43 AM

    This is very nice I want to build this but I can't see the codes sir please sir upload them.

    ReplyDelete
  7. Picmikroc programming Urdu HindiJuly 1, 2015 at 8:44 AM

    //----------------------------------------------------------------------------------------
    //Programmer: Syed Tahmid Mahbub
    //Target Microcontroller: PIC16F684
    //Compiler: mikroC PRO for PIC (Can easily port to any other compiler)
    //-----------------------------------------------------------------------------------------

    unsigned char sin_table[32]={0,25,49,73,96,118,137,
    159,177,193,208,220,231,239,245,249,250,249,245,
    239,231,220,208,193,177,159,137,118,96,73,49,25};


    unsigned int TBL_POINTER_NEW, TBL_POINTER_OLD, TBL_POINTER_SHIFT, SET_FREQ;
    unsigned int TBL_temp;
    unsigned char DUTY_CYCLE;

    void interrupt(){
    if (TMR2IF_bit == 1){
    TBL_POINTER_NEW = TBL_POINTER_OLD + SET_FREQ;
    if (TBL_POINTER_NEW < TBL_POINTER_OLD){
    CCP1CON.P1M1 = ~CCP1CON.P1M1; //Reverse direction of full-bridge
    }
    TBL_POINTER_SHIFT = TBL_POINTER_NEW >> 11;
    DUTY_CYCLE = TBL_POINTER_SHIFT;
    CCPR1L = sin_table[DUTY_CYCLE];
    TBL_POINTER_OLD = TBL_POINTER_NEW;
    TMR2IF_bit = 0;
    }
    }

    void main() {
    SET_FREQ = 410;
    TBL_POINTER_SHIFT = 0;
    TBL_POINTER_NEW = 0;
    TBL_POINTER_OLD = 0;
    DUTY_CYCLE = 0;
    ANSEL = 0; //Disable ADC
    CMCON0 = 7; //Disable Comparator
    PR2 = 249;
    TRISC = 0x3F;
    CCP1CON = 0x4C;
    TMR2IF_bit = 0;
    T2CON = 4; //TMR2 on, prescaler and postscaler 1:1
    while (TMR2IF_bit == 0);
    TMR2IF_bit = 0;
    TRISC = 0;
    TMR2IE_bit = 1;
    GIE_bit = 1;
    PEIE_bit = 1;

    while(1);
    }
    //-------------------------------------------------------------------------------------
    PLZ CONVERT INTO HEX
    PLZZZZZZZZ

    ReplyDelete
  8. Picmikroc programming Urdu HindiJuly 1, 2015 at 8:44 AM

    //----------------------------------------------------------------------------------------
    //Programmer: Syed Tahmid Mahbub
    //Target Microcontroller: PIC16F684
    //Compiler: mikroC PRO for PIC (Can easily port to any other compiler)
    //-----------------------------------------------------------------------------------------

    unsigned char sin_table[32]={0,25,49,73,96,118,137,
    159,177,193,208,220,231,239,245,249,250,249,245,
    239,231,220,208,193,177,159,137,118,96,73,49,25};


    unsigned int TBL_POINTER_NEW, TBL_POINTER_OLD, TBL_POINTER_SHIFT, SET_FREQ;
    unsigned int TBL_temp;
    unsigned char DUTY_CYCLE;

    void interrupt(){
    if (TMR2IF_bit == 1){
    TBL_POINTER_NEW = TBL_POINTER_OLD + SET_FREQ;
    if (TBL_POINTER_NEW < TBL_POINTER_OLD){
    CCP1CON.P1M1 = ~CCP1CON.P1M1; //Reverse direction of full-bridge
    }
    TBL_POINTER_SHIFT = TBL_POINTER_NEW >> 11;
    DUTY_CYCLE = TBL_POINTER_SHIFT;
    CCPR1L = sin_table[DUTY_CYCLE];
    TBL_POINTER_OLD = TBL_POINTER_NEW;
    TMR2IF_bit = 0;
    }
    }

    void main() {
    SET_FREQ = 410;
    TBL_POINTER_SHIFT = 0;
    TBL_POINTER_NEW = 0;
    TBL_POINTER_OLD = 0;
    DUTY_CYCLE = 0;
    ANSEL = 0; //Disable ADC
    CMCON0 = 7; //Disable Comparator
    PR2 = 249;
    TRISC = 0x3F;
    CCP1CON = 0x4C;
    TMR2IF_bit = 0;
    T2CON = 4; //TMR2 on, prescaler and postscaler 1:1
    while (TMR2IF_bit == 0);
    TMR2IF_bit = 0;
    TRISC = 0;
    TMR2IE_bit = 1;
    GIE_bit = 1;
    PEIE_bit = 1;

    while(1);
    }
    //-------------------------------------------------------------------------------------
    PLZ CONVERT INTO HEX
    PLZZZZZZZZ

    ReplyDelete
  9. UnknownJanuary 10, 2016 at 8:48 AM

    very good.

    ReplyDelete
  10. UnknownFebruary 9, 2016 at 2:48 AM

    vai hex file give me plz.

    ReplyDelete
  11. UnknownMay 16, 2016 at 11:33 PM

    Can we use this spwm code for 3 phase inverter with required switching frequency is 20 kHz

    ReplyDelete
  12. UnknownMay 20, 2016 at 10:19 PM

    Please send me the schematic and code...i want to try it...by the way i'm from indonesia....this is my email (hery.potler@gmail.com)

    ReplyDelete
  13. naseerakMarch 28, 2017 at 11:26 PM

    Why you are begging him he is gonna give you nothing....

    ReplyDelete
  14. UnknownJune 25, 2017 at 4:47 PM

    Pls help with schematic with code here is my email: p4.npcpctb@gmail.com

    ReplyDelete
  15. Abu ChineduOctober 3, 2019 at 5:25 AM

    please I need the code and schematic diagram.

    Thanks.

    ReplyDelete
  16. PriyaSeptember 11, 2023 at 2:56 AM

    Thank you

    ReplyDelete