Tahmid's blog

Embedded Systems and Power Electronics

Total Pageviews

About Me

My photo
I am currently a PhD student at UC Berkeley, following a 6-year journey working at Apple after my undergrad years at Cornell University. I grew up in Dhaka, Bangladesh where my interest in electronics was cultivated, resulting in the creation of this blog.

BTemplates.com

Powered by Blogger.

Oct 10, 2012

Smart Sine - Software to generate sine table

  October 10, 2012    

There is an updated Python version of this now available, along with source code: https://tahmidmc.blogspot.com/2023/11/smartsinepy-and-example-of-gui.html

Here is the software Smart Sine, that I created and now use to generate sine tables.

It is the improved and more developed version of the software I had previously created with a few more useful features. It is relatively simple to use and gives results quickly as opposed to manually calculating the table.

If the software asks for .NET Framework Installation, you can download it from:


or


Download the software from :

Recommended:
https://drive.google.com/file/d/0B4SoPFPRNziHWVdLYVFKeHlsWjQ/view?usp=sharing


Here are a few screenshots:






  47 Comments

47 comments:

  1. UnknownMarch 16, 2013 at 1:29 PM

    Thank you

    ReplyDelete
    Replies
    1. TahmidMarch 18, 2013 at 9:15 AM

      You're welcome. I hope it's been helpful.

      Regards,
      Tahmid.

      Delete
    2. romio nahidNovember 1, 2013 at 6:40 PM

      hei bro can u mail me ??? i m from aiub eee intrested about ur project my mail nahideeeaiub@gmail.com me in fb https://www.facebook.com/EEEnahid please give ur contac mail/cellno in my mail or fb id

      Delete
  2. Myo GyeeApril 23, 2013 at 4:47 AM

    Thanks a lot..

    ReplyDelete
  3. AnonymousApril 28, 2013 at 11:58 PM

    Allah bless u....

    ReplyDelete
  4. AnonymousAugust 9, 2013 at 11:28 AM

    PROFESSIONAL,I LIKE IT.ALL THE BEST.
    DELIVIO

    ReplyDelete
  5. UnknownAugust 31, 2013 at 6:01 PM

    Tis cul.but how do i use it?

    ReplyDelete
  6. AnonymousOctober 18, 2013 at 9:10 PM

    this is very helpful.. thanks a lot tahmid..

    ReplyDelete
  7. UnknownNovember 1, 2013 at 2:05 PM

    tenk you.

    ReplyDelete
  8. jparacuellesNovember 2, 2013 at 2:33 PM

    I'm overwhelmed by your generosity. Thank you for sharing your knowledge. It mean so much :)

    ReplyDelete
  9. AnonymousFebruary 26, 2014 at 9:49 AM

    Thanks a lot!

    ReplyDelete
  10. KibbutzJune 9, 2014 at 8:26 AM

    hi Mr. Tahmid, am new to programming PIC, just let me say i just started,
    I love electronics so much and PIC,
    please assist me with e-book that can increase my potential. i really love this great blog.
    my email is kibbutz4success@gmail.com

    ReplyDelete
  11. AnonymousJune 19, 2014 at 12:12 PM

    hello
    very good your project, you can mail me the soft sine smart because I can not download it from the network.
    tallerseinel@hotmail.com.
    thanks

    ReplyDelete
  12. UnknownJuly 12, 2014 at 3:23 AM

    good job and useful

    ReplyDelete
  13. UnknownJuly 12, 2014 at 3:25 AM

    hei bro can pls mail me. (shijimusic@yahoo.com)

    ReplyDelete
  14. AnonymousJuly 23, 2014 at 5:18 PM

    Thanks bro! You are a lifesaver.

    ReplyDelete
  15. Fannaticc eletrônica avançadaNovember 29, 2014 at 7:30 PM

    You can share the sources?

    ReplyDelete
  16. PaulAndMuttleyDecember 30, 2014 at 6:17 PM

    I'd like to use your program but when I downloaded it and ran it, it seemed to be infested with crapware that I don't want or need. Can you just have a copy of the executable on a virtual server or web space, rather than "free" file storage that is full of ads and add-ons and other junk? I think I'll just write my own program or use a spreadsheet. Nuch better and faster than dealing with this junk, IMHO.

    ReplyDelete
  17. RyanJanuary 10, 2015 at 11:00 PM

    Thanks Tahmid, very useful

    ReplyDelete
  18. Simao BerkofMarch 26, 2015 at 9:05 AM

    Congratulations Tahmid, I'm using your software and I'm very satisfied with it. Have you ever been asked to include a starting angle or, at least, to choose between sine or cosine? I know one can achieve this using a index offset, nevertheless, it would be great to have this feature in the software. The software is great, I am a huge fan.

    ReplyDelete
  19. UnknownMay 5, 2015 at 1:17 AM

    Hi Tahmid,

    Thanks a lot for the very useful tutorial!
    Is it possible to generate a faster Sin with dsPic33 ? So about 50KHz Sin Frequenz?

    ReplyDelete
    Replies
    1. TahmidMay 8, 2015 at 10:06 PM

      It is possible. You'll need to keep in mind the PWM resolution you get and if that is satisfactory. In most cases, you'll probably be fine.

      Delete
  20. johannMay 27, 2015 at 11:53 AM

    Hi Tahmid,
    I would like to download your software , but raphid share have closed down any and 4share also any other link
    regards
    johann
    boomslang@mweb.co.za

    ReplyDelete
  21. AnonymousJune 13, 2015 at 12:21 AM

    Sir,
    I work with a 8 bit microcontroller. now for generating a sine wave , the values that i shall send to the DAC from the microcontroller , varies between '00' hex to 'ff' hex.... so how shall i get the negative part of the sine wave?

    I mean the output of the DAC will be between 0 volt to 5 volt.... I shall get the sine wave pattern but how shall i get the negative part...

    Should i use a negative clamper to get it???

    Hope u shall help me sir..

    ReplyDelete
  22. UnknownJune 25, 2015 at 12:07 AM

    Hello,

    Is there any way to download the software without having to use that crap website 4share or similar? there's like 400 ads on the page trying to trick people into downloading other junk software. Perhaps move it to your google drive? I just spent an hour cleaning all unwanted crap off my PC.

    ReplyDelete
    Replies
    1. TahmidJune 27, 2015 at 12:59 PM

      Noted! 4shared used to be much better than this. I guess I'll just start transitioning everything to Google Drive. Thanks for the feedback!

      Delete
  23. AnonymousJune 28, 2015 at 5:45 AM

    Hi BOSS,
    i have tried to download the software several times but its no longer on the link pls help me out on how to go about it. thanks

    ReplyDelete
  24. AnonymousJune 29, 2015 at 10:02 AM

    Error connecting

    ReplyDelete
    Replies
    1. TahmidJune 30, 2015 at 9:46 PM

      Try again now and let me know if you're still facing issues.

      Delete
    2. UnknownApril 21, 2018 at 12:44 AM

      hello sir could please tell me how to implement this code with 3-phase ?

      Delete
  25. AnonymousJuly 18, 2015 at 7:35 PM

    Nice program. I would suggest to add hex data format

    ReplyDelete
  26. AnonymousAugust 26, 2015 at 5:29 AM

    Very nice software!

    ReplyDelete
  27. Nmorka PrinceJanuary 22, 2016 at 3:13 PM

    Nice one Tahmid! I downloaded the software successfully. I appreciate ur good works, may God bless u mightily.

    ReplyDelete
  28. UnknownAugust 6, 2016 at 2:01 AM

    I have download smart sine. it shoing "application cannot be start , contact application vendor."
    please help

    ReplyDelete
    Replies
    1. UnknownAugust 6, 2016 at 6:03 AM

      Sorry Boss. I was installing it on win7 32 bit. so it has error.
      i have tried your smart sine on windows XP. And it's work fine.
      Thanks a lot. and sorry.

      Delete
  29. AnonymousJanuary 6, 2017 at 9:28 AM

    Thanks Tahmid, very useful the software for te sine Table.
    Your site is also easy to use too, I’ve bookmark it in my folder and will tell my students of it.
    Corné van Dijk

    ReplyDelete
  30. Saeed ahmedJanuary 12, 2017 at 6:18 AM

    AoA.
    I m confused about how to create 8 bit sine table because I am using atmega8 timer2. Your smart sine generating values are greater than 255 if I increasing peak values greater than 250 v.plz help me I will thank full to you.

    ReplyDelete
  31. DávidMay 22, 2017 at 2:24 PM

    Kudos for this application. Just what I needed. Thanks man!

    ReplyDelete
  32. xiaoJuly 6, 2017 at 7:49 PM

    Hi Tahmid, great job.
    any consideration to open source and github holding those release?

    ReplyDelete
  33. UnknownAugust 4, 2017 at 6:34 AM

    Great work bro...

    ReplyDelete
  34. FadsToObsessionsSeptember 2, 2017 at 8:38 PM

    Tahmid, Thanks, I used the sine table generated by your software to produce a waveform generator (square wave, triangle, sawtooth and sine wave) based upon PIC18F248 microcontroller allowing user input via PC/RS232 to select waveform, frequency and amplitude, and then use a MCP4921 DAC to output the desired waveform.
    For those interested, check it out here http://www.fadstoobsessions.com/Learning-Electronics/Component-Testing/MCP4921-DAC.php

    ReplyDelete
  35. AnonymousSeptember 18, 2017 at 2:40 AM

    Dear Tahmid,
    Greetings! Great job indeed!
    I have been also referring to your Sine Wave generation implementation using dsPiC33Fj publication. I have a small query as I too use the similar algorithm for my thesis but with dsPIC33FJ32MC202 very similar to yours controller. I would like to create a V/Hz control to vary my frequency linearly as a ramp function starting from a low volatge. Could you please provide me some valuable inputs or idea ont he same. I am using sine table with 4K values(one period) and 20Khz PWM, 20Mhz- Fosc.
    Thank you in advance. Keep up the good work!

    ReplyDelete
  36. AnonymousMay 10, 2018 at 5:53 AM

    Thank you a lot.
    Dziękuję bardzo.
    Bogdan

    ReplyDelete
  37. AnonymousMay 29, 2018 at 3:28 AM

    Can You add the calculation by RMS (each value * 0.707) & calculation by Average (each value * 2PI=0.637)?

    ReplyDelete
  38. nnadineMay 26, 2021 at 12:18 AM

    Thanks again, man.

    ReplyDelete

Subscribe to: Post Comments (Atom)